OBDSTAR X300 DP Plus C Configuration X300 PAD2 Full Version
OBDSTAR X300 DP Plus C Configuration X300 PAD2 Full Version
OBDSTAR X300 DP Plus C Configuration X300 PAD2 Full Version
  • OBDSTAR X300 DP Plus C Configuration X300 PAD2 Full Version
  • OBDSTAR X300 DP Plus C Configuration X300 PAD2 Full Version
  • OBDSTAR X300 DP Plus C Configuration X300 PAD2 Full Version

OBDSTAR X300 DP Plus C Configuration X300 PAD2 Full Version with P001, P004 Airbag Reset Kit, Renault Converter and FCA 12+8 Adapter

OBDSTAR X300 DP Plus C Configuration X300 PAD2 Full Version with P001, P004 Airbag Reset Kit, Renault Converter and FCA 12+8 Adapter

Weight:

8.0KG ( 17.64LB )

Package:

50.8cm*16.5cm*39cm ( Inch: 19.95*6.48*15.32 )



Description

view-1.jpg

OBDSTAR X300 DP Plus (X300 PAD2) Key Programmer C Package Full Version

Promotion: Buy X300 DP Plus pack C, get free P004 airbag reset kit, FCA 12+8 converter and Renault converter. 

Burst Point:

  • It is the first tool can do 2021 new GM system bypass pin code with a network connection.

  • It does a lot of 2021 Ford's too with Ford AKL active alarm bypass cable.

  • Bypass Toyota Corrola 4A Promixty all keys lost 12 digit PIN.

  • It can clone GM BCM.

  • You can buy the full adapter set and you get free motorcycle immo key learning. also PWC into.

  • Also has odometer change and got good coverage

  • You can do airbag reset for various vehicles with p004 airbag reset kit or godiag jumper


OBDSTAR X300DP PLUS Key Programmer Full Package:

Immobilizer + Mileage correction + Diagnosis + Special function (Oil reset + ABS + Battery matching + ECU programming + EPB + Throttle programming + Airbag reset + TPMS + Steering angle reset + OBDII + DPF + Injector code + Suspension matching + Gear learning + CVT learning + EEPROM + Key renewing + ECU cloning ) Adapter ( P001 programmer + C001 circuit board + C002 circuit board + W001 data cable + W002 data cable + W003 data cable + Toyota smart key Emulator ) + others ( Ignition coil + Remote tester) + P004 Airbag Reset Kit P004 Adapter

1.jpg

Notice:
1. Dealer Code: 860755B1/ 0086A002
2. Language: English
3. Update Free for One Year, the update cost is 500USD/year.
4. OBDSTAR X300 DP Plus Car List: http://en.obdstar.com/car.html
5. If you do not have enough budget, but want the same IMMO function level as X300 DP Plus, choose OBDSTAR X300 PRO4
6. It doesn't support the following car models: DAIHATSU/ PROTON/ MAHINDRA/ MARUTI/ TATA/ HOLDEN/ LADA/ PERODUA/ IRAN. (Please contact local dealers from your area to get authorization)

X300 DP Plus Recent Important Update:

  • Adds 2018- Wildlander, Avalon, Rav4, Crown Kluger HV, RAV4 HV, Lexus ES, RX, UX 8A AA proximity

  • Adds Honda 2019- ID47 Proximity all keys lost via OBD

  • Adds Nissan 2021- Sentra, Juke, J12, R53 proximity add key free pin code (require Nissan 16+32 gateway adapter)

  • Add Renault Duster PH3 2018-, Tribber 2018-  proximity key programming free pincode

  • Add 2015-2018 Jaguar Land rover proximity all keys lost make start key (OBD)

  • Add Mazda CX30 2020 and Mazda 3, Axela 2020 add key and all keys lost

  • Adds Nissan 2018- Kicks and 2018- Micra K14 Proximity/Blade 22-digit (actually 20-digit) rolling code key programming (Free pincode)

  • Add Nissan Xtrail 2021, Altima 2022, Armada 2022, Infiniti Q50 2022, Q60 2022 proximity by OBD

  • Add PSA DCM7.1, MD1, MG1, EDC17C60, V56 pin code reading

  • Add Hyundai Accent, Elantra, Santa FE, Tuscon, i10, Kia Carnival, Sorento, Stonic 2020/2021- Proximity

  • Add Ford F350 F450 F440 2018 Type 2 mileage correction

  • Add Toyota 2019-2021 Corolla, Corolla HV, Levin, Levin HV 4A proximity key programming free pin code (with Key SIM and jumper)

  • Add Motorcycle immobilizer key programming (Requires software license and motor immo adapters kit)

  • Adds CADILLAC XTS 2014-, Colorado 2014-, S10 2017- Silverado 2019- SS 2014-, Suburan 2019-, Tracker 2014-/2017-, GMC Acadia 2017-, Canyon 2017-/2014-, Sierra 2019-, Terrain 2017-, Saturn Aura 2017-/2012- cluster calibration via OBD

  • Add Peugeot Citroen Delphi BSI all keys lost pin code reading via OBD (308,5008, Expert, C3, Aircross etc)

  • Toyota 8A non-smart key All keys lost, new Ford All Keys Lost programming (P002 Adapter)

  • GM Cadillac Chevrolet GMC Buick 2020 2021 IMMO key programming (CAN FD adapter)

  • Bypass Dodge RAM 2021 proximity (FCA adapter), Caravan 2019-2021 Fobik,No need PIN code.

  • Mitubishi 47 Proximity All key lost by OBD

  • Honda Accord, Crider, Inspire, Envix 2020 Knob key all keys lost

  • Fiat IAW 4AF, 59F, 5AF, MJD 8F3 ECU Clone

  • Lots of Hyundai IMMO till 2020

  • Lots of Subaru ALL KYE LOST By OBD, till 2020

  • Fiat 500X, Tipo, Egea 2017- Blade key (Delphi)

  • Lots of Ford 2018-2020 bypass pincode

  • Support Toyota 4D and H Chip & All Key Lost via OBD (Key SIM simulator)


Diagnostic Function:

1. Diagnose the electronic control system of prevailing vehicle models covering Asian, European, American and Chinese. Diagnosis functions include: Read DTCS, Clear DTCS, Read data stream, Special functions etc.

2. Classify special function: ABS, EEPROM Adapter, Battery match, CVT learning, Instrument activation, EPB, Gear learning, Immobilizer, TPMS (low tire) reset, Cluster calibrate, ECU programming, steering angle reset.

3. Specially designed for Android platform with clear and user-friendly interface;

OBDSTAR X300 DP PAD2 Hardware Advantages:

1. Built-in VCI box, communication more stable

2. 8-inch touchscreen, more intuitionistic

3. Can be charged directly via OBD interface

4. Practical and high-end gift box

5. Industrial design with silicone case

6. Back bracket design:Can prop on the steering wheel or stand on the table, easier to operate

7. 3 in 1, P001 programmer: combined with EEPROM adapter + RFID adapter+ Key Renew adapter

8. Add the clip of reading SOP 8PIN EEPROM

9. Add wiring harness of ECU reading by OBD (for ECU cloning and switch activation)

How to Register and Update OBDSTAR X300 DP Plus?
OBDSTAR X300 DP Plus IMMO & Odometer Car List


X300 DP PLUS Full Software Advantages:

I ECU Clone

1. ECU Clone, means ECU duplication.

The device copies all the data from the original vehicle ECU, and then writes all data copied into ECU with the same hardware to realize the same ECU function with the original vehicle.

2. Clone directly when replacing a new or a used ECU!

Without online matching in 4S store or removal of ECU bonding wire for reading and writing! Directly write without dismantling OBD!

3. Three features for ECU Clone:

A. Break monopoly from 4S, benefiting automobile maintenance industry

B. Simplified operation procedures: realize foolproof operation

C. Non-dismantling with zero risks: read and write data without dismantling ECU

ECU Programming

II: Switch activation function

(Today many instruments or audio of vehicles activate secondary power supply to go into power-on status by relevant module CAN communication on the vehicle, but sometimes an instrument or an audio is separated from vehicle CANBUS network, causing startup failure when it needs to be repaired by an auto technician. This function can simulate CAN communication to activate secondary power supply, so the instrument or the audio enters into power-on status. In this way, it not only can test and verify the instrument or the audio, but also save an enormous cost for an auto technician to purchase a large number of startup platforms of various vehicles and wiring harnesses!)

obdstar-x300dp-plus-switch-activation
III: Add “Help” functions

including built-in testable vehicle models, upgrade announcement, features, help notes and wiring diagrams, etc.

IV: Carlist: can directly get on the device

V: Upgrade Announcement: all details are available on the device

VI: Customers can look up the features or uniquely support functions on the device

VII: Help notes: built-in help notes for each model or function

VIII: Wiring diagrams: built-in ECU wiring diagrams, more intuitionistic and convenient

obdstar-x300dp-plus-help

How to use OBDSTAR X300 DP Plus Induction Coil?
I. Functional Overview:
Induction Coil is used to detect the key induction coil failure of the vehicle.

II. Application Method:
Attach the Induction Coil to the key induction coil, and insert the key or turn ignition on, while Induction Coil red indicator lights up and goes out, indicating the key induction coil is good;the indicator does not illuminate to indicate the key coil is damaged, please check and repair or replace.


obdstar-x300-dp-plus-induction-coil

X-300 DP PLUS TECHNICAL PARAMETER

● Operation system: Android 5.1.1

● CPU: Exynos4418 Dual Core ARM Cortex A9 1.4GHz

● Battery: 3700mA, rechargeable polymer lithium battery

● Extension memory card: 32G Micro SD (TF) card supported

● Memory capacity:1GB

● Storage capacity: 32GB

● LCD: 8.0 inch

● LCD resolution: 1280*800

● Touch screen: Capacitive touch screen

● Camera: 5 mega rear view camera

● Wi-Fi: supported

● Working temperature: -10℃ ~ 55℃(14℉ ~ 131℉ )

● Storage temperature: -20℃ ~ 70℃(-4℉ ~ 158℉ )

● Weight: about 1.0 Kg

● Dimension: 254mm*174*mm*35mm

OBDSTAR X300 DP Plus Software Update Instruction:

Tap "One Key Upgrade" to enter one key upgrade page, as following picture shown:

obdstar-x300-plus-software-update-1
Tap “One Key Upgrade” to start downloading, enter main interface after finishing downloading. (Notes: Ensure internet connection is normal when updating. Besides, because of many software, it may take several minutes, please wait patiently) If need to cancel a software, just tap corresponding Check Box as following picture shown:
obdstar-x300-plus-software-update-2

OTHER CONFIGURATIONS:

A Package:

Immobilizer+Special function(EEPROM+Key Renewing)Adapter(P001 programmer+C001circuit board+C002 circuit board+W001 cable+W002 data cable+W003 data cable+Toyota smart key Emulator)+others(Ignition coil+Remote tester)

B Package:

Immobilizer+Special function(EEPROM+Key Renewing)+Mileage correction+Adapter(P001 programmer+C001 circuit board+C002 circuit board+W001 data cable+W002 data cable+W003 data cable+Toyota smart key Emulator)+others(Ignition coil+Remote tester)
obdstar-x300-dp-plus-a-b-c-package

Package List:
X300 DP Plus Main Unit
Main Wire
12V2A DC Charger
KIA-20
OBD II-16 Connector
HONDA-3
HYUNDAI/KIA-10
IMMO Induction Coil
Muti-functional Jumper
P001 Programmer Unit
C001/C002 Circuit Board
W001
W002
W003
RT100
Configuration List/Certificate/Quick Start Guide Fold
P004 Airbag Reset Kit P004 Adapter

OBDSTAR X300 DP PLUS vs. OBDSTAR X300 DP

S/NFeatures & FunctionsObdstar X300 DP PlusObdstar X300 DP



Hardware & Design

1Screen size and industrial designBetterGood
2Back holder×
3Work separately without VCI×
4Charged by OBDII×
54 Toyota emulators×
6P001 programmer×
7Wiring harness for new functions, such as ECU cloning and switch activation×

Software/Update (Free for 1 year)285USD/year
1Immobilizer
2Mileage
3EEPROM
4ECU Clone×
5Switch activation function×
6"Help" function - covers built-in support car list,
upgrade announcement,
help notes and wiring diagrams
×
7No need pay for software update for FREE during the valid time (one year)×




send inquiry to us

Related Product

Chat with us